DURUM Verschleißschutz GmbH

Booth number 3815-4

www.durmat.com

About us

DURUM is one of the market leaders in the repair of Non-magnetic tools and parts used in the Oil and Gas Industry. As a result of applying specially-developed products, we can now offer our clients the unique ability to salvage Magnetic and Non-magnetic parts that would otherwise have been scrapped. This represents a major break-through in our research and development program and significant cost-benefit to our clients.

For example:

  • Material overlays on thin Non-magnetic parts to ensure reduced wear and extended/reusable part live
  • Application of precise and uniform metal overlays to resize tools such as stabilizers - to a thickness of over 5 mm


Parts commonly repaired include string / near bit stabilizers, sleeves and other specialized directional drilling Wear Parts.

Products and services

Our wide range of specialized surface hard-facing materials includes: 

  • Tungsten carbide rods for oxy-acetylene welding
  • Nickel, cobalt and iron based flux cored wire
  • FCAW wires with tungsten carbide and complex carbides to provide extremely hard and tough coatings, used primarily for extreme wear applications
  • Tungsten carbides, complex carbides and chromium carbides for manual arc welding
  • PTA welding powders
  • PTA machines, torches and powder feeders
  • Powders for oxy-acetylene welding and spraying
  • Fused crushed and spherical tungsten carbides
  • Pre-manufactured replacement wear parts
  • Thermal spray powders (conforming to DIN EN 1274)
  • Thermal spray wires (conforming to DIN EN 14919)


The company is also one of the market leaders in the repair of Non-magnetic tools and parts used in the Oil and Gas Industry. As a result of applying specially-developed products, we can now offer our clients the unique ability to salvage Magnetic and Non-magnetic parts that would otherwise have been scrapped. This represents a major break-through in our research and development program and significant cost-benefit to our clients. 

DURUM HARD-FACING PRODUCTS

Our wide range of specialized surface hard-facing materials includes: Tungsten Carbide Rods for oxyacetylene welding / Tungsten Carbide Tubular and Flexible “floppy rods” for extreme wear / Nickel, Cobalt or Iron based Flux Cored Wire / FCAW wires / Tungsten carbide, Complex Carbides and Chromium Carbides / PTA Welding Powders / PTA Machines, Torches and Powder Feeders / Pre-manufactured replacement wear parts / Thermal Spray Powders (DIN EN 1274) / Thermal Spray Wires (DIN EN 14919)

Further reading

DURWELD 300 T PTA - Mobile PTA-System

As a result of more than 15 years of in-house development and use, we have now introduced the next generation of a durable, reliable, mobile PTA machine onto the market. The cost-efficient PTA welding system DURWELD 300T PTA is equipped with a powerful water cooling unit and can be operated manually or, optionally, with external manipulation devices using CNC or robotic interfaces; moreover it can also be supplied with an interface for connection to a robot system.

Further reading

DRILL PIPE HARDFACING

DURMAT Casing friendly Hard-facing Wires are specially developed to reduce casing wear and to extend life of tool-joints.
With the experience of more than 25 years in producing Hard-facing Wires for all kinds of industrial applications DURUM is offering a wide range of crack-free iron based Hard-facing Wires. Most wires are Open Arc (no extra shielding gas or flux required) and some wires can be applied and reapplied on itself.

Further reading

Address
DURUM Verschleißschutz GmbH
Carl-Friedrich-Benz-Str. 7
47877 Willich
Germany

Phone: +49 2154 4837-0
Fax: +49 2154 483778
Internet: www.durmat.com
E-mail: Send message

Contact person

Peter Knauf
President
Phone: +49 171 2627516
E-mail: Send message

Representative
DURUM USA
25702 Aldine Westfield Road, Suite 601
TS 77373 Spring
USA

Phone: +1 936 539-2630
Fax: +1 936 539-2470
Internet: www.durumusa.com
E-mail: Send message

News & Innovations

DURUM VERSCHLEISS-SCHUTZ GMBH

DURUM VERSCHLEISS-SCHUTZ GMBH was established in 1984 as a manufacturer of advanced hard-facing products. Today DURUM has production and service centers in Brazil, France and the USA and exports to more than 80 countries all over the world!

DURUM provides high performance welding and surfacing wires and powders and is a global market leader in the supply of specialized overlaying consumables that can be applied by a range of processes including: Flux Cored Wire, Plasma Transferred Arc (PTA) Welding, Oxy-fuel Welding, Thermal Spray Powder and Wire.

Besides Willich (Germany) DURUM Group maintains production and workshop facilities in Brazil (São Paulo), France (Saint Victor) and the USA (Houston TX). We also support a network of independent agencies throughout the world. We meet demanding requirements of today’s industry with a wide array of Welding and Thermal Spray technologies.

The company employs national and international PhD’s; welding engineers and independent experts from well-known and respected universities, which ensures that constant material and process development is achieved to the highest standards. DURUM focuses on “continuous development” and sets a significant annual budget aside for research and development including new product development, product enhancement and the development of highly specialized solutions to the most challenging applications in the industry.
We meet the demanding requirements of today’s industry with a wide array of Welding and Thermal Spray products including Flux Cored Wire, PTA (Plasma Transferred Arc) our famous oxy-acetylene products and last but not least our Thermal Spray Powder and Wire.

Today we have a world-class solution developed for every aspect of wear, typically encountered throughout the industry that outperforms competitive products in the market.


Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact