About us

For more than 60 years now SCHALLER AUTOMATION has contributed worldwide to achieve a safe operation of large Diesel, Gas and Dual Fuel engines, brought innovative products to the market and built a trustworthy partnership with clients.

These qualities have made SCHALLER AUTOMATION to become the market leader in the sector of the protection of large Diesel, Gas and Dual Fuel engines against crankcase explosions by detection of Oil Mist.

Products and services

The Visatron Oil Mist Detectors continuously draw atmosphere from the crankcase compartments through a wear-free suction system. Special suction funnels and draining components ensure correct operation under all conditions. The sample flow is guided through an optical channel where turbidity is measured by the absorption of infrared light. The opacity required to trigger the alarm can be set at different levels.
VN301plus

VN87plus

The VISATRON® Oil Mist Detectors continuously draw atmosphere from the crankcase compartments through a wear-free suctionsystem. Special suction funnels and draining components ensure correct operation under all conditions.

The sample flow is guided through an optical channel where turbidity is measured by the absorption of infrared light.

The opacity required to trigger the alarm can be set at different levels.

ACCOMOS

ACCOMOS®, a 3-axis Acceleration Monitoring System allows the monitoring of vibration within your Engine drive line. After a short Teach-In-period the system makes sure to keep e.g. your GenSet’s vibration within its limits.

Address
Schaller Automation LP
811 Shotgun Road
33326 Sunrise
USA

Phone: +1 954 794-1950
Fax: +1 954 794-1951
Internet: www.schalleramerica.com
E-mail: Send message

Contact person

Shareef El-Sayed
Accounts Executive
Phone: +1 954 794-1950
E-mail: Send message

News & Innovations

Schaller Automation releases new Engine Monitoring System: ACCOMOS®

Schaller Automation, a specialist within the monitoring and protection of large Diesel, Gas and Dual Fuel engines against severe engine damage by means of the Detection of Oil Mist widens its scope of supply by a new product.
ACCOMOS®, a 3-axis Acceleration Monitoring System allows the monitoring of vibration within your Engine drive line. After a short Teach-In-period the system makes sure to keep e.g. your GenSet’s vibration within its limits.
The one-sensor-solution is designed to be installed within minutes: some of the strongest Neodym-magnets available on the market make sure the sensor stays permanently in place also at your engine - Even without surface machining.

The sensor comes as a Stand-alone-Solution with adjustable thresholds for yellow and red-indications and can be read out real time via CAN or RS485 interface – and all that maintenance free.

As an option, a Remote Monitoring Software offers to monitor Real time acceleration as well as the Frequency spectrum and records data for later analysis.

Click here if you notice an image that violates copyright or privacy rights.

Get in contact