Key-Visual OTC 2019
Logo OTC 2019

German Pavilion at
OTC 2019

What is German Pavilion?

6 – 9 May 2019 – Houston, USA
Offshore Technology Conference and Exhibition

Add to my calendar

News & Innovations

News and innovations published by German exhibitors

Schaller Automation releases new Engine Monitoring System: ACCOMOS®

Schaller Automation, a specialist within the monitoring and protection of large Diesel, Gas and Dual Fuel engines against severe engine damage by means of the Detection of Oil Mist widens its scope of supply by a new product.ACCOMOS®, a 3-axis…

Exhibitor: Schaller Automation LP

Further reading

RUD ACP Turnado

The first smart lifting point.

Exhibitor: RUD Ketten Rieger & Dietz GmbH u. Co. KG

Further reading

PROTECTION AGAINST WEAR FOR MORE THAN 30 YEARS

With over 30 years of experience developing, manufacturing and marketing materials based on tungsten carbides, we have become one of the leading and most consistent partners for protection against wear. Our products are sold under the registered trade mark DURMAT®.…

Exhibitor: DURUM USA

Further reading

TYPICAL APPLICATIONS / WEAR SOLUTIONS

Typical Applications for DURUM hard facing consumables: Drill-pipe tool-joints (low-friction, low wear) Stabilizers (regular, austenitic, non-magnetic) Radial Bearings OD and ID Fishing Tools (over-shots, spears, under-shots) Cutting and Milling tools Hole Openers Reamers Tri-cone Drill bits (teeth, shirt-tales) PDC bits…

Exhibitor: DURUM USA

Further reading

ECOTROL® 8C 4.0 the universal process control valve

The ECOTROL® 8C control valve has proven itself in over 15 years of use in the process industry, whether in energy technology, in chemical and petrochemical processes or in water and environmental technology. With the unique clamping seat system that enables…

Exhibitor: ARCA Regler GmbH

Further reading

ECOTROL® DN 700 (28“) optimised for use as an anti-surge valve

ARCA rounds off the proven series of ECOTROL® control valves at the high end with the new development of the nominal size DN 700 (28”). This valve has been specially optimised for use as an anti-surge valve on turbocompressors, but can…

Exhibitor: ARCA Regler GmbH

Further reading

EMKA laboratory receives further accreditation

Located in the company's technology centrer the EMKA test laboratory offers a wide range of measuring and testing procedures – always taking into account the high-quality requirements for locks, hinges and seals. EMKA has now been accredited by the Deutsche…

Exhibitor: EMKA Inc.

Further reading

Hygienie tested AISI 316 Quarter Turn Latches

Enhancement of the program for hygienic areas and adding a solution that complies with the hygienic requirements according to EHEDG (European Hygienic Engineering Design Group).AISI 303 for the food sector and AISI 316 for the food and medical sector: Both…

Exhibitor: EMKA Inc.

Further reading

EMKA Presents the Locking Solutions of the Future

The future presented on 280 m2: At HANNOVER MESSE 2019 EMKA presents the entire portfolio of electronic locking systems including several new solutions. In addition to further developments such as the eCam Safety or the Agent-E as well as proven…

Exhibitor: EMKA Inc.

Further reading

New range of Breuer Oilfield ecoVert

The Oilfield ecoVert VFM is a unique combination of a Breuer high quality drilling motor perfectly integrated with a Breuer high power variable frequency drive. It is designed specifically to increase machine availability for drilling applications while saving energy costs…

Exhibitor: Breuer-Motoren GmbH

Further reading

BCS 3600ex Ultra-Rugged Series Handheld Scanners

Introducing the BARTEC BCS 3600ex Ultra-Rugged Series, a new class of scanner designed to work in the toughest Ex conditions. Wait times between scans, barcodes that can’t be read and downtime when a scanner fails create unacceptable delays. Every minute…

Exhibitor: BARTEC US Corporation

Further reading

Explosion protection at a glance - new and updated posters!

The marking of equipment for use in hazardous areas can be quite complicated and confusing. BARTEC offers interested parties a well-proven overview with useful Ex information. The popular posters are constantly extended, optimized and updated.Gift yourself with an overview of…

Exhibitor: BARTEC US Corporation

Further reading

The ms con-cept GmbH from Germany has been a specialist in district heating / district cooling for many years.

As a supplier of the carrier pipe (carbon steel / stainless steel /etc.) and the pipe components (fittings, bends, pipe accessories) for the system pipe manufacturers, we act as a reliable and innovative partner worldwide. With our membership in the…

Exhibitor: ms con-cept GmbH

Further reading

Longitudinal welded steel pipe in DN800 with outlets of different sizes supplied by ms con-cept.

Longitudinal welded steel pipe in DN800 with outlets of different sizes supplied by ms con-cept. The goods are destined for the district heating industry in the Northern European market. Materials will be outside coated with a combined PU inside foam/…

Exhibitor: ms con-cept GmbH

Further reading

20,000psi CORIOLIS METERS FOR CHEMICAL INJECTION APPLICATIONS

Rheonik Messtechnik GmbH are pleased to introduce the expansion of their highly successful and field proven Omega Coriolis Flow meter range to cover chemical injection applications up to 20,000psi.Coriolis meters are highly desirable in these applications for their low maintenance…

Exhibitor: Rheonik Messtechnik GmbH

Further reading

DURUM VERSCHLEISS-SCHUTZ GMBH

DURUM VERSCHLEISS-SCHUTZ GMBH was established in 1984 as a manufacturer of advanced hard-facing products. Today DURUM has production and service centers in Brazil, France and the USA and exports to more than 80 countries all over the world! DURUM provides…

Exhibitor: DURUM Verschleißschutz GmbH

Further reading

VTEM - Festo Motion Terminal

Pneumatics is a simple technology often used for the control of fingerboards in Oil & Gas. The VTEM from Festo now makes this simpler, more versatile and safer – moving pneumatics into the age of Internet 4.0. The VTEM is…

Exhibitor: Festo AG & Co. KG

Further reading

MS4 Multi-Stage Valve Trim for the Relaxation of Fluids containing Solid Matter

The ARCA angle style control valves series 350 and 380 have since long proven themselves in various applications under critical process conditions. Whether used for the control of steam or process gas at high pressures and temperatures, in the cavitation-free…

Exhibitor: ARCA Regler GmbH

Further reading

JP special gasket (for flange combination grooved and RF)

Revoseal’s new development in sealing solutions is namely a result of intensive dialogue between Revoseal and a major producer in the chemical industry that relies on high quality sealings.A dual sealing concept bridges the connection between a raised face flange…

Exhibitor: revoseal Europe GmbH

Further reading

NEMO® progressing cavity pumps guarantee constant delivery rate regardless of the product viscosity

Crude oil with a high sand content is one of the most difficult conveying media: On the one hand, the consistency is not clearly predictable because of the constantly changing composition and, on the other hand, the sand particles contained…

Exhibitor: NETZSCH Pumpen & Systeme GmbH

Further reading

NETZSCH ESPCP prevents blowout and environmental impact from leaks

For transporting multi-phase mixtures with high gas content to the surface from more than 1,000 m below, a suitable extraction system is required. Centrifugal pumps with submersible drive are not suitable due to the high risk of failure from gas…

Exhibitor: NETZSCH Pumpen & Systeme GmbH

Further reading

SMJ technology - Surface Mounte4d Joystick

The joysticks for the Planar®, HyPro® and Nano series are part of the NBB component strategy for the unit design.The SMJ joysticks are integrated in the housing with positive locking without housing openings. As joysticks are included as wear parts…

Exhibitor: NBB Controls + Components GmbH

Further reading

DURUM USA

DURUM Germany recognized that to satisfy the needs of the large and important US market an independent local company should be established to promote similar products and services offered by DURUM in Europe.DURUM USA’s initial foray into the Industry began…

Exhibitor: DURUM USA

Further reading

NOTOS® multi screw pumps strip out even highly viscous media

Tanks to entire tank farms are the backbone of many industries, in particular in the oil and fuel sector. But these types of media are often highly viscous, making it difficult to empty or ‘strip’ all the medium out of…

Exhibitor: NETZSCH Pumpen & Systeme GmbH

Further reading
OK

We use cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection